Operating Manual TSA S200-H (Head Up Display System)

Be Safe Don't Look Down Contents

1. Introduction of HUD

2. HUD interface and function instruction

3. Function Introduction

4. Introduction of Alert Function

5. Cautions

6. Product Dimension and Electrical Parameter

7. Accessories

8. Derail Drawing

1. Introduction of HUD

1.1. HUD is short term for “Head Up Display”, which means you can simply see the display screen by looking up or straight. If the driver needs to look down to the meter display when the vehicle is moving at high speed, the sudden reaction time for the driver will be limited and may cause serious accident. This happened especially at night. In order to avoid such situation occur some higher level cars had already equipped with the HUD system. The device projects all relevant information onto the front windshield at driver’s eye level height. The projection position is adjustable and the brightness will adjust automatically based on the ambient brightness as well. Due to which the driver needn't to look down at the instrument board and the visual time of seeing blind spot is shortened. It is of great value to reduce traffic accidents caused by looking down at the instrument board. 1.2. This is a multifunctional product, developed based on the OBD II interface, with the features of stable performance, exquisite appearance, safe application, and convenient installation that anyone can finished the installation and adjustment within 3 minutes. . In order to give full play to its all functions, please read the instruction carefully before using the product. In this case, you can enjoy the ride as well as improve the driving pleasure and safety.

2. HUD interface and function instruction

2.1. This product is HUD with OBD II interface, with features of simple installation, "plug and play", and no damage to original circuit. 2.2. Suitable for vehicles of any model with metric and British units switched freely. 2.3. Vehicle speed and rotate speed displayed in one screen with convenience and direct viewing features 2.4. All-digital display, with convenience and direct viewing features. 2.5. Polarizer design to reduce interference of driver's sightline (optional) 2.6. Scroll button contributes to easy operation for users (complete all settings by just one finger) 2.7. Check Engine Reminder：When start the car and the vehicle get error code ,warning light will stays on. 2.8. Gear Changing alert: appropriate for new drivers (Suitable for vehicle models of manual transmission as well as manual automatic transmission) 2.9. Displaying brightness will adjust automatically according to ambient brightness 2.10. the HUD will get Protocol 【Agreement No】. when you start the car and turn on HUD devise at first time. 2.11. The battery voltage shown automatically after engine start. 2.12. Auto power on & off function: The HUD will turn on automatically when engine start and off when engine off. 2.13 Flexible flat Cable (Cab6.0) makes clean layout. 2.14 Distance traveled will be displayed before the shutdown after flameout (Turn off engine)

3. Function Introduction

 

 3.1 Screen function A.
Digital display area B. Engine rotate rate display area C. Battery voltage warning light D. Unit E. Indicator light of engine temperature F. Engine Check warning light G. Indicator light of set state Km/h: Kilometer per hour MPH: Mile per hour ℃: Centigrade ℉: Fahrenheit V: Voltage km/hmph℉℃s76812345FCBDAGE

3.2 Button and interface functions A

Power switch B Light Sensor C Data connection port D Scrolling button

①    Scroll up: switching multi-functions to display

②    Scroll down: warning for exceeding the set speed : Kilometers : 60 80 100 120 Miles : 25 45 65 80 (for choice, every time the button is scrolled up, the screen will display the current set speed )

③    Push the middle button lightly to switch between Metric / British Unit

 3.3 Setting mode introduction
Press and hold the scroll button when HUD is off then the power button while holding the scroll button to enter the setting mode. In setting mode, press the scrolling button downwards to decrease the value, and upwards to increase. The button right in the middle is for Enter, Save and Exit.

Mode 1 Compatibility options: Value of 1: Average vehicles Value of 2: Hybrid or idling stop cars

Mode 2 Protocol selection (0-8) 【Agreement No.】 is automatically selected default value 0:

1：KWP2000 FAST 2：KWP20005BPS

3：91415BPS 4：9141 FAST

5：CAN 500K 11BIT 6：CAN500K 29BIT 7：CAN 250K 11BIT 8：CAN250K 29BIT

Mode 3 Speed factor setting (80-120):Default setting is 108. Please adjust based on driving condition.

Mode 4 Speeding alert setting（1-255）: Free setting

Mode 5 Engine temperature (90~130) : Free setting

Mode 6 Voltage(9V~14V) : Free setting

Mode 7 Buzzer time (0-30s): Buzzer off when 0

Mode 8 Driving distance (80 to 120): The default setting is 104, Please be adjusted according to actual condition

Setting is completed by the middle of the wheel to jump back and turn off the power saving parameter data entry

4. Warning function

4.1 Speeding warning The buzzer “ beep “ noise accurse & Flash light warning (Imperial Units) when speeding. The sound will last for 5 seconds ( Default ) and mute automatically leaving only flash light warning. 
4.2 Engine temperature Warning： Engine temperature hazard light on when water temperature is over 110℃ 
4.3.Battery Warning： Battery low hazard light on when battery under 11V 【After changing the settings on user own, according to the set value based】

5. Additional Information 
5.1. The information shown from the device is for reference only. 
5.2. Set device only when vehicle stop. 
5.3. 1 year guarantee.. Nature disaster & false usage by man are not under warranty. 
5.4. Use none chemical cleanser for panel to avoid damage. 
5.5. Accessories are not warranty. ( Case, USB cable, membrane etc. )

 6. Product SPEC 
 Length:80MM Width: 50MM Height:14MM Working voltage: OBDⅡ 12V Maximum working current: 300MA Standby working current:﹤20MA Working temperature: -40℃）~（85℃）

7. Contents  
7.1. HUD *1 
7.2. Membrane (Reflective film )*2 
7.3. OBD II cable *1 
7.4. Manual *1 
7.5. Magic Sticker*1

8. Detail drawing

A. Data connector   
B. Scrolling button   
C. Speaker    
D. Light Sensor 

E. Power switch   
F. Display Screen